- Home
- About
  - Contact
  - Join Skynet
  - History
  - Committee
  - Constitution
  - Society Policy
  - Sponsors
- Services
  - Anyterm
  - Books
  - Encyclopedia
  - Mailing Lists
  - Downloads
  - Memorial
  - WebMail
  - WebIRC
  - Wiki
- User Guide

# The 'ping' command

The 'ping' command is used to check if another site is active. All sites connected to the internet are required to be able to return a signal if a particular signal is sent to them. The sent signal is called a ping. The originating site sends a series of 'pings' at the target site and the target site then sends similar ones back. The ping program then uses the times between the sent pings and the returned ones to work out how slow the connection is and the number of non-returned pings to work out how reliable it is. The output will look something like this:

    skynet:~> ping itd1.ul.ie
    PING itd1.ul.ie (136.201.1.1): 56 data bytes
    64 bytes from 136.201.1.1: icmp_seq=0 ttl=255 time=11.7 ms
    64 bytes from 136.201.1.1: icmp_seq=5 ttl=255 time=5.5 ms
    64 bytes from 136.201.1.1: icmp_seq=6 ttl=255 time=6.0 ms
    64 bytes from 136.201.1.1: icmp_seq=7 ttl=255 time=5.5 ms
    64 bytes from 136.201.1.1: icmp_seq=8 ttl=255 time=6.1 ms
    ò
    --- itd1.ul.ie ping statistics ---
    5 packets transmitted, 5 packets received, 0% packet loss
    round-trip min/avg/max = 5.5/6.4/11.7 ms

After a few pings are sent, just hit \ C to finish, the longer you leave it the more accurate your results will be.
Skynet - University of Limerick Computer Society
XHTML 1.1 :: CSS 2 :: 508 :: © 2009
Disclaimer: Neither Skynet administration nor University of Limerick accept responsibility for users site content.